Articles

From Incandescent to LED: Lighting a Medical or Dental Office

By Dave Hartman.

Updated November 10, 2026 by Stephen Lease, Vice President.

When this article first ran in 2012, the incandescent bulb was on its way out and the replacement was an open question. That question is settled: LED won. This update covers how that happened and what to look for when lighting is chosen for a medical or dental office.

How the incandescent bulb was retired

The Energy Independence and Security Act of 2007 set the change in motion. It raised efficiency requirements for everyday bulbs and included a backstop, a minimum of 45 lumens per watt for general service lamps if later rulemaking fell short. The Department of Energy put that backstop into its regulations in 2022. Enforcement was phased in, starting with manufacturers and importers and reaching retailers in full by mid-2023. Most incandescent and halogen bulbs cannot meet 45 lumens per watt, so they left store shelves. Some specialty lamps are exempt.

The 2012 version of this article leaned toward compact fluorescents (CFLs) and said LEDs tended to burn out quickly. Neither point holds today. CFLs contain a small amount of mercury, and the Environmental Protection Agency now describes LED bulbs as more efficient, more versatile, and longer lasting than CFLs or incandescents.

What LED offers today

  • Efficiency. ENERGY STAR states that LED products can produce light up to 90 percent more efficiently than incandescent bulbs.
  • Long life. The Department of Energy puts the useful life of good-quality white LED products at 30,000 to 50,000 hours or longer. LEDs typically do not burn out. They dim slowly, and useful life is measured to the point where output falls to 70 percent of the original.
  • Dimming. LEDs dim well when the fixture's driver and the dimmer are designed to work together.
  • No mercury. Unlike fluorescent lamps, LEDs contain no mercury.

What matters in a healthcare space

  • Color rendering. The color rendering index (CRI) rates how faithfully a light source shows color. The Department of Energy recommends a minimum CRI of 80 for interior lighting. Rooms where color drives a decision, such as an operatory where a dentist matches a tooth shade or an exam room where a provider reads skin tone, are usually specified higher. Ask about R9 as well, the value for saturated red, which matters for skin. The newer ANSI/IES TM-30 method gives a fuller picture than CRI alone.
  • Color temperature. Measured in kelvins, it describes whether light looks warm or cool. Many offices use a warmer tone in reception and a neutral or cooler tone in clinical rooms. Keep it consistent within a room.
  • Glare and uniformity. Patients in a dental chair or on an exam table look straight up. Fixtures should be chosen and placed to keep bright sources out of their line of sight and to light the room evenly.
  • Task lighting. Operatories and procedure rooms need room lighting that works with the chair-mounted or ceiling-mounted task light.
  • Flicker. Flicker in an LED fixture comes mainly from the driver, and dimming can make it worse. The Department of Energy links flicker to headaches and reduced task performance. Specify quality drivers and compatible dimmers.

The Illuminating Engineering Society publishes a recommended practice for healthcare lighting, ANSI/IES RP-29, that your design team can work from.

Energy code and lighting controls

Commercial energy codes regulate more than the fixtures. The International Energy Conservation Code (IECC) and ASHRAE Standard 90.1 limit the lighting power allowed per square foot and require automatic controls. In general, that means occupancy sensors in rooms such as private offices, restrooms, break rooms, and storage rooms, daylight-responsive controls in larger areas near windows or skylights, and automatic shutoff after hours. Plan the controls with the rest of the electrical system. Texas sets a statewide baseline and cities adopt their own editions and amendments, so the requirements for your project come from your local building department.

What to ask during design and construction

  • What CRI, R9, and color temperature are specified for each clinical room?
  • Are the dimmers and drivers confirmed compatible?
  • Which rooms get occupancy sensors?
  • How does the room lighting coordinate with the dental or procedure lights from the equipment supplier?
  • Who programs and tests the controls before move-in?

For two examples from our own work, Colleyville Vision Associates includes a Lutron lighting system (exam lane dimming is covered in building an eye care practice), and Bridget McAnthony, DDS Pediatric Dentistry in Fort Worth uses a suspended lighting system over its open-bay operatory.

All articles

Common questions

Can I still buy incandescent bulbs for my office?

For general lighting, mostly no. Since the Department of Energy's 45 lumens per watt minimum for general service lamps took effect in 2022, most incandescent and halogen bulbs can no longer be sold in the United States. Some specialty lamps are exempt. A new office is designed around LED fixtures.

What CRI should lighting in a dental or medical office have?

The Department of Energy recommends a minimum CRI of 80 for interior lighting. Rooms where color drives a decision, such as an operatory used for shade matching or an exam room, are usually specified higher. Ask your designer for the CRI, the R9 value, and TM-30 data for those fixtures, and look at a sample before the order is placed.

Do LED lights burn out?

Usually not the way older bulbs did. ENERGY STAR notes that LEDs typically do not burn out. They dim slowly over time. The Department of Energy puts the useful life of good-quality white LED products at 30,000 to 50,000 hours or longer, measured to the point where output falls to 70 percent of the original.

Planning a new building, a finish-out, or a renovation? Tell us about it.

Start a project817-329-4241